Taylor® GT-66 Details
Purpose Built Industrial Lift Truck


6600 lbs / 2994 kg

Load Center:

24 in. / 610 mm


66.9 in. / 1699 mm


The GT66 is capable of handling long duty cycles and has a rated capacity of 6,600-lbs. Taylor 24-in Load Center Pneumatic Tire lift trucks are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring.

Standard Features: GT-66

  • 125” Max Fork Height 2-Stage Mast (85.8-in lowered height)
  • 45-in Hook Type Class III Carriage (with Load Backrest)
  • Hydraulic Cushioning Valve facilitates silent staging and reduces shock and vibration
  • Carriage features (6) load and side thrust rollers (shimmable, sealed and canted)
  • 2.0-in X 5-in X 42-in pin mounted Forks GT-66
  • 2.4K HMC Theta LPG Engine (Diesel is available)
  • Donaldson dry-type air cleaner w/safety element & restriction indicator
  • Single Speed Powershift Transmission with Inching
  • Powertrain Protection System for engine and transmission
  • HD planetary Drive Axle with Wet Disc Brakes
  • Fully Boxed Welded Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 28 X 9 X 15 Pneumatic Single Drive tires
  • 6.00 X 10 Pneumatic Steer tires


  • Isolation mounted open operator base with overhead guard (includes dual brake pedal, dome light, wide angle mirrors, handrails and full rubber black floor mats).
  • Adjustable Black Vinyl Covered Full Suspension Seat (Seat has 6” fore and aft travel, adjustable back rest, 2.4” vertical travel, and lumbar support. Also has Operator weight range adjustability.)
  • Column mounted directional control with no linkage - FWD/REV selected by moving lever up and down
  • Hood mounted hydraulic control levers
  • Operator Restraint System (Orange, anti-cinch seat belt)
  • Dual operator presence systems will not allow transmission to engage and will not allow hydraulics to engage unless operator is in the seat.
  • Interactive LCD Dash Display with audible warnings for low fuel, transaxle oil temperature, parking brake and seat belt. Visual displays for transmission temperature, engine oil pressure, alternator, fuel system, seat belt reminders, turn signals, gear selected, maintenance timer, fuel levers, and travel speeds. (Includes Fault Code Storage)
  • Two pedal hydraulic inch brake provides excellent control and comfort
  • Infinitely adjustable steering column that pivots 30° above knee
  • Hood mounted ratchet style park brake disengages transmission when applied


  • 12-volt electrical system
  • Heavy-duty battery
  • Utilizes all environmentally sealed wire connectors
  • Key-type electronics switch with key start
  • Electric horn
  • Keyswitch-actuated amber strobe light
  • Reverse actuated warning alarm

Vehicle Information Package

  • Operator’s Guide
  • Maintenance and Service Documentation
  • Safety Check Manual and Video


This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.